|
|
INSUL-FLEX Cloth
Expansion Joint Product
The Insul-FLEX series are made of gas-tight fluoroplastic coated/laminated fiberglass cloth laminated to insulation into one integral layer. Expansion joints made of INSUL-FLEX will exhibit the following benefits:
| |
*prevent hot gas from residing between the 2 components,
*make installation easier and faster,
*improved filed splicing quality of the insulation materials,
*increase the joint strength (tear and tensile) for longer service life,
*increase resistance against flex caused by gas turbulence, and
*higher application pressure limit |
|
----------------------------------------------------------------------------------------------------------------
| TYPICAL PROPERTIES |
|
<--Gas Tight Layer (0.3 to 1.5mmT) |
| |
<--Insulation (1.0 to 12.7mmT) |
---------------------------------------------------------------------------------------------------------------- |
| |
Available Gas Tight Layer Materials |
Available Insulation Materials |
| Grade |
CBF |
FLUO-FLEX |
CBF-FLEX |
KM600 Needled Blanket |
KM600 Fabrics |
| Thickness (mm) |
0.3, 0.5, 0.76 |
0.5, 0.9, 1.2 |
0.9, 1.2, 1.3, 1.5 |
6, 10, 12.7 |
1.0 , 1.6, 2.0, 3.0 |
| There are 70 different combinations of above 2 components to meet various application conditions. |
|
| PRODUCT EXAMPLE |
|
| Product ID |
9-143F/F-1.6 |
12-204P/F-3.0 |
9-143F/F-12.7 |
| picture |
 |
 |
 |
| Insulation/
Thickness(mm) |
KM600 16-100H/1.6 |
KM600 30-200H/3.0 |
KM600 Needled Blanket/ 12.7 |
Gas Tight Layer/
Thickness |
FLUO-FLEX 5-75F/F
(0.5) |
FLUO-FLEX 9-143F/F
(0.9)
|
CBF-FLEX 12-204P/F
(1.2) |
Temperature Limit °C
|
330 |
370 |
500 |
| Weight (g/m2) |
1740 |
3400 |
3800 |
|
|
|
|
